dmesg output from mini desktop computer ...

 OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
 cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 801 MHz
 cpu0: FPU,V86,DE,PSE,TSC,MSR,APIC,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
 cpu0: RNG AES
 real mem  = 1006137344 (959MB)
 avail mem = 964714496 (920MB)
 mainbus0 at root
 bios0 at mainbus0: AT/286+ BIOS, date 05/16/06, BIOS32 rev. 0 @ 0xfa8c0, SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
 bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/16/2006
 bios0: VIA Technologies, Inc. CN400-8237
 apm0 at bios0: Power Management spec V1.2 (slowidle)
 apm0: AC on, battery charge unknown
 acpi at bios0 function 0x0 not configured
 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd3c4
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd310/176 (9 entries)
 pcibios0: PCI Exclusive IRQs: 11 12
 pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
 pcibios0: PCI bus #1 is the last bus
 bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x8000!
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 "VIA PM800 AGP" rev 0x00
 agp0 at pchb0: v3, aperture at 0xe8000000, size 0x10000000
 pchb1 at pci0 dev 0 function 1 "VIA PM800 Errors" rev 0x00
 pchb2 at pci0 dev 0 function 2 "VIA PM800 Host" rev 0x00
 pchb3 at pci0 dev 0 function 3 "VIA PM800 DRAM" rev 0x00
 pchb4 at pci0 dev 0 function 4 "VIA PM800 PMC" rev 0x00
 pchb5 at pci0 dev 0 function 7 "VIA PM800 PCI" rev 0x00
 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
 pci1 at ppb0 bus 1
 vga1 at pci1 dev 0 function 0 "VIA PM800 Unichrome S3" rev 0x02
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 vr0 at pci0 dev 13 function 0 "VIA RhineII-2" rev 0x8d: irq 12, address 00:40:63:ed:a0:dd
 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 13: OUI 0x004063, model 0x0034
 pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
 pciide0: using irq 11 for native-PCI interrupt
 wd0 at pciide0 channel 0 drive 0: <ST980811AS>
 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
 uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 12
 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 12
 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
 usb0 at ehci0: USB revision 2.0
 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
 viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
 iic0 at viapm0
 spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
 vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 12, address 00:40:63:ed:a0:dc
 ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063, model 0x0032
 usb1 at uhci0: USB revision 1.0
 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
 usb2 at uhci1: USB revision 1.0
 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
 usb3 at uhci2: USB revision 1.0
 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
 usb4 at uhci3: USB revision 1.0
 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
 isa0 at mainbus0
 isadma0 at isa0
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: <PC speaker>
 spkr0 at pcppi0
 lpt0 at isa0 port 0x378/4 irq 7
 wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
 lm1 at wbsio0 port 0x290/8: W83697HF
 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
 pccom2: probed fifo depth: 15 bytes
 biomask ff45 netmask ff45 ttymask ffc7
 uscanner0 at uhub1 port 1 configuration 1 interface 0 "Hewlett-Packard HP ScanJet 2200C" rev 1.10/1.00 addr 2
 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2
 uhidev0: iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir.
 wsmouse0 at ums0 mux 0
 ulpt0 at uhub1 port 2 configuration 1 interface 0 "Hewlett-Packard hp LaserJet 1320 series" rev 1.10/1.00 addr 3
 ulpt0: using bi-directional mode
 softraid0 at root
 root on wd0a swap on wd0b dump on wd0b